PCB milling
Component placement
SolderingContact
P2J Technology s.r.o.
Dolni Roven 153, 53371 Dolni Roven
Czech republic
phone: +420 725 884 930
info(a)mipec.eu
Dolni Roven 153, 53371 Dolni Roven
Czech republic
phone: +420 725 884 930
info(a)mipec.eu
Introduction » PCB milling » Accessories » Rivets 0,6mm (1000pcs)
Rivets 0,6mm (1000pcs)
In stock
Copper rivets for through hole plating. Especialy developed for through hole plating of PCB prototypes. Through hole plating rivets are packed in the small containers by 1000pcs. Rivets are sorted and ordered by INNER diameters accordingly to the table below:
| INNER diameter | OUTER diametr | Recomended hole diameter |
| 0,4mm | 0,6mm | 0,7mm |
| 0,6mm | 0,8mm | 0,9mm |
| 0,8mm | 1,0mm | 1,1mm |
| 1,0mm | 1,4mm | 1,5mm |
| 1,2mm | 1,6mm | 1,7mm |
| 1,5mm | 1,9mm | 2,0mm |
To be able to insert the rivet into the drilled hole in the PCB comfortably, it is recomended to drill the hole about 0,1mm bigger then the outer diameter of the rivet as mentioned in the table above.
