Introduction » Component placement » SMD manipulator 4PLACE + camera
SMD manipulator MIPEC 4PLACE with vision system
SMD Manipulator 4PLACE creates compact, performing assembly system for prototype PCB assembly and low volume production. Slight arm movement in X and Y axis allows comfortable component picking from tapes and their placing all over the mnipulator desktop with PCB. Precise Z axis leading of placing head provide accurate and gentle component placing into the solder paste. Placing head button, is used for needle rotating around its own axis at the same time. In the placing head , there is also integrated source of light for easier orientation over components and PCB and head movement magnetic sensor, which is used for switching of vacuum, accordingly to head possition. One push of head button is meant as picking a component and second push means its place.
Standard supply contains: Manipulator’s table with moveable arm, LCD monitor, camera with aditional light source, power supply 230/12 V, vacuum pump, 3 magnetic PCB holders, 2 vacuum cups, spare needle for vacuum pipette and service instructions.
A miniature CCD camera is built into the head for mounting small size 0201 chips as well as for precise positioning of very fine pitch ICs. The camera has 2 positions and displays either a setting needle or a dosing nozzle. The magnified image at a low angle is displayed on a large 15 " PC monitor.
Separately ordered/supplied as accessories :
Manipulator dimensions(l/w/h): 790 x 390 x 170 mm
Working area max: 350 x 210 mm
Dimensions w. feeders max.: 1140 x 650 mm
Power supply: Adaptor 230/12 V
Arm movement in axis x/y/z: 470 x 230 x 15 mm
Vacuum pump supply: 230 V, 6 W
Weight: 7 kgs
Viewing angle: 78°
CCD sensor: 1/4 " size, 8 Mpix
Video resolution: 1080p30 - Full HD
Display dimensions: 15.6 " widescreen 16: 9
Resolution: 1366 x 768 pixels
Dimensions with stand: 378 x 281 x 189 mm