Get a Quote
Customer support:+420 725 884 930info@mipec.eu
    Home / PCB Milling and Drilling Tools

    PCB Machining Tools for Prototyping & Production

    Whether you're an electronics enthusiast, a researcher in a cutting-edge laboratory, or an engineer working on small-scale production, high-quality PCB machining tools are the backbone of successful circuit board development. Precision milling and drilling are crucial for ensuring clean traces, well-defined paths, and structurally sound connections—all without relying on chemical treatments.

    Our advanced technology empowers you to craft PCBs with remarkable accuracy, helping you move seamlessly from design to implementation. With a well-equipped workspace, you can refine your prototypes, troubleshoot designs, and optimize performance before full-scale production.

    Why Precision Matters

    • Flawless Execution: Achieve perfect alignment for through-hole components and smooth, burr-free board edges.
    • Process Control: Gain total control over your fabrication process, drastically reducing errors and material waste.
    • Reliable Results: Deliver dependable, high-performance prototypes and small-scale production runs on demand.

    Product sorting

    48 items total

    List of products

    basic toolset
    Basic Toolset - 25pcs of PCB MILLING and Drilling Tools

    Basic toolset offers milling and drilling tools for PCB prototyping, standard engraving tools 0,2 - 0,5mm suitable for milling insulation paths from 0,2 to 0,5mm, contour...

    P2J-TS-BASIC
    p2j et 010 a
    Micro cutter 1/8", 36mm, d: 0,1-0,2mm

    Fine line PCB milling tool for milling extra fine insulation paths about 0,1mm width.

    MIPEC-ET-010
    p2j cr 150a
    MIPEC Contour Router 1.5mm

    PCB chip breaker router is mainly used for cutting outer contours of PCBs and is also use for routing holes bigger than 3mm and inner contours of PCBs.

    MIPEC-CR-150
    p2j cr 100
    MIPEC Contour Router 1mm

    PCB chip breaker router is mainly used for cutting outer contours of PCBs and is also used for routing holes bigger than 3mm and inner contours of PCBs.

    MIPEC-CR-100
    p2j cr 250
    MIPEC Contour Router 2.5mm

    PCB chip breaker router is mainly used for cutting outer contours of PCBs and is also use for routing holes bigger than 3mm and inner contours of PCBs.

    MIPEC-CR-250
    p2j cr 200a
    MIPEC Contour Router 2mm

    PCB chip breaker router is mainly used for cutting outer contours of PCBs and is also use for routing holes bigger than 3mm and inner contours of PCBs.

    MIPEC-CR-200
    p2j cr 300
    MIPEC Contour Router 3mm

    PCB chip breaker router is mainly used for cutting outer contours of PCBs and is also use for routing holes bigger than 3mm and inner contours of PCBs.

    MIPEC-CR-300
    p2j em 040a 0
    MIPEC Endmill (RF) 0.15mm

    Two flute endmill with  0.15mm diameter used for routing or milling printed circuit boards.

    MIPEC-EM-015
    p2j em 040a 0
    MIPEC Endmill (RF) 0.25mm

    MIPEC Endmill 0.25mm – Precision Milling for Fine PCB Traces & Micro-Engraving

    MIPEC-EM-025
    p2j em 040a 0
    MIPEC Endmill (RF) 0.4mm

    MIPEC Endmill 0.4mm – High-Precision Milling for PCB & Fine Detail Work

    MIPEC-EM-040
    p2j em 100 0
    MIPEC Endmill 0.8mm

    MIPEC Endmill 0.8mm – High-Precision Milling for PCB and Fine Detail Work

    MIPEC-EM-080
    p2j em 100 0
    MIPEC Endmill 1.0mm

    MIPEC Endmill 1mm – High-Precision Milling for PCB & Fine Detail Work

    MIPEC-EM-100
    p2j em 200 0
    MIPEC Endmill 2.0mm

    MIPEC Endmill 2mm – Precision Milling for PCB Fabrication & Engineering Applications

    MIPEC-EM-200
    p2j em 200 0
    MIPEC Endmill 3.0mm

    MIPEC Endmill 3mm – High-Performance Milling for PCB & Industrial Applications

    MIPEC-EM-300
    p2j d 050
    MIPEC PCB Drill 0.2mm

    For drilling holes with high possitional accuracy and for drilling of small through holes and vias.

    MIPEC-D-020
    p2j d 050
    MIPEC PCB Drill 0.3mm

    Carbide 0.3mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality.

    MIPEC-D-030
    p2j d 050
    MIPEC PCB Drill 0.4mm

    Carbide 0.4mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-040
    p2j d 050
    MIPEC PCB drill 0.5mm

    Carbide 0.5mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-050
    p2j d 050
    MIPEC PCB Drill 0.6mm

    Carbide 0.6mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-060
    p2j d 050
    MIPEC PCB Drill 0.7mm

    Carbide 0.7mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-070
    p2j d 050
    MIPEC PCB Drill 0.8mm

    Carbide 0.8mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-080
    p2j d 050
    MIPEC PCB Drill 0.9mm

    Carbide 0.9mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-090
    p2j d 150 a
    MIPEC PCB Drill 1.0mm

    Carbide 1.0mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-100
    p2j d 150 a
    MIPEC PCB Drill 1.1mm

    Carbide 1.1mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-110
    p2j d 150 a
    MIPEC PCB Drill 1.25mm

    Carbide 1.25mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-125
    p2j d 150 a
    MIPEC PCB Drill 1.2mm

    Carbide 1.2mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-120
    p2j d 150 a
    MIPEC PCB Drill 1.3mm

    Carbide 1.3mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-130
    p2j d 150 a
    MIPEC PCB Drill 1.4mm

    Carbide 1.4mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-140
    p2j d 150 a
    MIPEC PCB Drill 1.5mm

    Carbide 1.5mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-150
    p2j d 150 a
    MIPEC PCB Drill 1.6mm

    Carbide 1.6mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-160
    p2j d 150 a
    MIPEC PCB Drill 1.7mm

    Carbide 1.7mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-170
    p2j d 150 a
    MIPEC PCB Drill 1.8mm

    Carbide 1.8mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-180
    p2j d 150 a
    MIPEC PCB Drill 1.9mm

    Carbide 1.9mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-190
    p2j d 150 a
    MIPEC PCB Drill 2.0mm

    Carbide 2.0mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-200
    p2j d 150 a
    MIPEC PCB Drill 2.1mm

    Carbide 2.1mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-210
    p2j d 150 a
    MIPEC PCB Drill 2.2mm

    Carbide 2.2mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-220
    p2j d 150 a
    MIPEC PCB Drill 2.3mm

    Carbide 2.3mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-230
    p2j d 150 a
    MIPEC PCB Drill 2.4mm

    Carbide 2.4mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-240
    p2j d 150 a
    MIPEC PCB Drill 2.5mm

    Carbide 2.5mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality.

    MIPEC-D-250
    p2j d 300 a
    MIPEC PCB Drill 2.6mm

    Carbide 2.6mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality.

    MIPEC-D-260
    p2j d 300 a
    MIPEC PCB Drill 2.7mm

    Carbide 2.7mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-270
    p2j d 300 a
    MIPEC PCB Drill 2.8mm

    Carbide 2.8mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-280
    p2j d 300 a
    MIPEC PCB Drill 2.95mm

    Carbide 2.95mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-295
    p2j d 300 a
    MIPEC PCB Drill 2.9mm

    Carbide 2.9mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-290
    p2j d 300 a
    MIPEC PCB Drill 3.0mm

    Carbide 3.0mm PCB drill bit for drilling holes with high possitional accuracy and excellent hole wall quality

    MIPEC-D-300
    professional toolset
    Professional toolset - 50pcs of tools, 20 pcs of copper clads and 10 pcs of drill underlay material

    Professional Toolset includes 50 precision tools, 20 copper clads, and 10 underlay sheets—engineered for advanced PCB milling, drilling, and routing. Fully compatible with...

    MIPEC-TS-PROFI
    professional toolset
    Standard toolset - 50pcs of tools

    Standard toolset offers tools for complete PCB work, standard engraving tool 0,2 - 0,5mm suitable for milling insulation paths from 0,2 to 0,5mm width, contour router 2mm and...

    MIPEC-TS-STANDARD
    p2j et 020 a
    Universal cutter 1/8", 36mm, d: 0,2-0,5mm

    Standard PCB engraving tool for milling insulation paths and removing small areas of cooper. This tool is one of the most popular tools for PCB milling and is often called as...

    MIPEC-ET-020

    Listing controls

    48 items total
    Vytvořil Shoptet | Design Shoptak.cz